Kewill Global

FLOW  IP68

DOWNLOAD PDF


CHARACTERISTICS

Measuring liquid display device,the operation of moto rotor is in proportion with velocity,the speed of rotor is clear to see,then we can measure the flow.Copper alloy or stainless steel 316L structure.

TECHNICAL DATA

  • ●The glass inner surface can be cleaned mechanical structure.
  • ●360 degree no dead zone visible.
  • ●Withstand voltage:16bar
  • ●Medium temp: max.100℃
  • ●Avg pressure loss:Qmax, 0.25bar

TECHNICAL DATA

  G Type Max flow Operation min.flow L/min L SW H Weight
mm L/min(water) water 40 mm²/s 41-150 mm²/s mm mm mm kg
Brass G1/4 FWR-008GM 4 0.4 2.0 3.0 72 36 9 0.35
G3/8 FWR-010GM 8 0.6 2.0 3.0 72 36 9 0.35
G1/2 FWR-015GM 12 1.0 3.0 3.5 86 46 13 0.65
G3/4 FWR-020GM 25 1.0 3.0 3.5 94 46 16 0.65
G1 FWR-025GM 40 1.6 3.0 3.5 104 46 16 0.65
G1 1/4 FWR-032GM 90 8.0 4.0 5.0 120 65 19 1.6
G1 1/2 FWR-040GM 100 8.0 5.0 5.0 130 65 20 1.7
Stainless steel G1/4 FWR-008GK 4 0.4 2.0 3.0 72 72 72 0.35
G3/8 FWR-010GK 8 0.6 2.0 3.0 72 72 72 0.35
G1/2 FWR-015GK 12 1.0 3.0 3.5 86 86 86 0.65
G3/4 FWR-020GK 25 1.0 3.0 3.5 94 94 94 0.65
G1 FWR-025GK 40 1.6 3.0 3.5 104 104 104 0.65
G1 1/4 FWR-032GK 90 8.0 4.0 5.0 120 120 120 1.6
G1 1/2 FWR-040GK 100 8.0 5.0 5.0 130 130 130 1.7

MATERIALS:

FWR-…GM FWR-…GK
Shell Bronze MS58 Stainless steel 1.4305
Moto rotor POM(red) POM(red)
Windows tube Glass Glass
Cleaning device Polyene material Polyene material
Seal NBR NBR

INSTALLATION POSITION

MEASURING MEDIUM


INSTALLATION POSITION

SELECTION TABLE

FWR- 008 G M SPECIFICATION
DN applicable 008   Nominal diameter DN8~G1/4
010 Nominal diameter DN10~G3/8
015 Nominal diameter DN15~G1/2
020 Nominal diameter DN20~G3/4
025 Nominal diameter DN25~G1
032 Nominal diameter DN32~G1 1/4
040 Nominal diameterDN40~G1 1/2
  G   Internal thread interface
Material optional M Bronze MS58
K Stainless steel 1.4305

DOWNLOAD PDF